The WKM DynaSeal 210 ball valve is a two piece design with a ductile iron body and tailpiece. This valve is economical and it includes many of the premium design features found in the WKM DynaSeal 310 carbon steel ball valve.

It is available in 1 in. (25 mm) to 4 in. x 3 in. (100 mm x 80 mm) sizes. Working pressures offered are 750, 1,000, 1,500 and 2,000 psi.

This valve is primarily used in the oilfield market for the following applications.

• Production wing valves on low pressure gas wells
• Production flow lines
• Production gathering systems for water, oil and gas
• Gas blow down service
• Tank batteries for storage or production
• Frac water tanks

Features and Benefit

• LOCKING CAPABILITY IS STANDARD
  • The valve can be locked in the open or closed position.
• POSITIVELY RETAINED STEM
  • The stem is positively retained. It is designed to prevent stem blowout while the valve is in service.
• COLOR CODED WORKING PRESSURES
  • The lock plates are color coded so pressure ratings are quickly identified
    • 750/1,000 psi green.
    • 1,500 psi blue.
    • 2,000 psi red.